Showing posts with label Stazon. Show all posts
Showing posts with label Stazon. Show all posts

Tuesday, March 8, 2022

Watercoloring with Markers

I like Stampin' Write markers for several reasons - I like to sign my cards with matching ink colors to the card design, they make inking a stamp in multiple colors easy to do, and my new favorite - you can use them to watercolor!!!  I've done watercoloring for many years (started back in high school) and I just learned that you can use them in this manner!  You'll need some permanent ink for the image, watercolor paper (this is essential for watercoloring success) and water based markers (no Stampin' Blends!) in addition to your markers.  As you can see in my video, this technique is simple, neat and great for beginners!

Gather your supplies:

  • Cardstock:  Basic Black 8-1/2" x 5-1/2"; Basic White 4" x 4-1/4"; Regals 6" x 6" DSP 4" x 5-1/4"; Pumpkin Pie 2" x 1-1/4"; and Fluid 100 Watercolor Paper 2-5/8" x 4-1/2"
  • Stamp Set: Flowers of Friendship
  • Ink:  Stazon Jet Black
  • Water Painters
  • Stampin' Write Markers (Pumpkin Pie and Granny Apple Green from the Regals and Brights sets)
  • Matte Black Dots
  • Adhesive and Tools
When doing any coloring with water, you need to use a permanent ink to stamp your images - Stazon is permanent ink that will not bleed when you add water.  Start by stamping the flower image onto the watercolor paper.  Before I start my watercoloring process, I like to test how well the markers blend.  To do this, use a scrap of the watercolor paper and draw a patch with the bold tip end of the marker.  Use the water painter to test how well this splotch of color blends.  You don't want a color that leaves harsh lines or will not react easily with the water.  I did find that a few colors didn't blend as well as I would like.



Now you are ready to start coloring the flowers.  I keep an old towel handy to catch any drips and a cup of clean water for dipping.  I know the water painters have a supply of water in the barrel, but I prefer to dip because I can control the amount of moisture better this way (and it's faster rinsing when I change colors). Using the brush tip of the Pumpkin Pie marker, add some color to one of the flowers - I like to add color where I want it to be darkest.  Then blend out this color to finish filling in the petals.  It's ok to have some small areas of white - that is common in water coloring.

Continue coloring in the rest of the flower petals and then rinse the water painter.  Repeat the process with the leaves and the Granny Apple Green marker.  Set this panel aside to dry completely.  If this was an image with a lot of coloring, you could use your heat tool on the low setting to help it dry.

Assemble the rest of the card, starting by folding and burnishing the card base.  Add the DSP panel to the front and the white panel to the inside.  Stamp the sentiment onto the scrap of Pumpkin Pie and trim the width if needed.  Add the watercolor piece to the upper left corner with Dimensionals.  Add the sentiment, placing a Dimensional under the right side only.  Finish the card by adding two Matte Black Dots to the lower right corner.  

This card was done with Mango Melody - which one is your favorite?

My next card features the Otter that was part of our recent Sale-a-bration.  I stamped and colored him with my markers.  Then I fussy cut right along the black lines, ignoring all the little bits of hair that extended out from the image.  Normally, I leave a little gap around the outside, but not this time.  I stamped the same otter image onto the blue paper and when I adhered the otter on top, he had all his hairy pieces surrounding him again!


Look at this adorable robot!  I love how the watercolor technique makes his metal look more realistic!  He is from the Nuts & Bolts stamp set.  The girl with the book comes from In the Moment, a set with three fantastic images that are perfect for watercoloring.  The rest of the examples are florals, such a natural choice for this technique.  I love how easy it is to get shading with the markers.  After your image is dry, you can go back and add more color.  Or you can add more water to remove color!  Play around with this and see what you come up with!




The last card was made for a color challenge I participated in - Fresh Freesia, Rich Razzleberry and Pear Pizzazz.  I forgot to show it in the video, but I thought I'd show it here.  

I hope you give this a try!  It's really so very easy and turns you into an artist and your card into something that will wow the recipient!


Karen


ThePowerOfACard@gmail.com

Etsy Shop: The Power of a Card

https://karensliwinski.stampinup.net 

https://ThePowerOfACard.blogspot.com

Images Copyright Stampin’ Up!®


Join my Facebook Group (The Power of a Cardmaker):  https://www.facebook.com/groups/1042676296088278/?ref=share


My current host code for March is: UQ4UWMR7

Please use this for orders less than $150 and you’ll get a special treat from me.

For orders over $150, you qualify for host rewards from Stampin’ Up! (plus a treat from me!).


Product List

Wednesday, March 10, 2021

Dragonfly Circles

This simple card uses a retired Stampin' Up! product called a sanding block - I can't even remember when I purchased it, but I know it's been some time. If you don't happen to save one in your supplies, you can use a sanding block with fine sandpaper like the type you might use when preparing your walls to paint.  Although the card is simple in both design and execution, the results are quite impressive!  Here is my video to show you how.  

Gather your supplies:

  • Cardstock:  Basic Black 5-1/2" x 8-1/2", scored at 4-1/4"; Basic White 3" square and 4" x 5-1/4", Artistry Blooms DSP 3-1/4" x 7-1/2"
  • Ink:  Jet Black Stazon, Frost White Shimmer Paint
  • Stamp bundle: Dragonfly Garden 
  • Dies: Layering Circles
  • Embossing Folder: Parisian Flourish 3D
  • Stampin' Spritzer
  • Adhesive and Tools
I chose to have a black card base and stamp with Stazon ink to make the card pop!  Fold your card base in half and give it a good crease.  Stamp one of the dragonflies on the white square (leaving enough space in the corner to cut your smallest circle). While you are stamping, go ahead and stamp your inside sentiment and grouping of dragonflies on the white rectangle and adhere it in place.  Three things about Stazon ink pads: 1) they smell amazing (really!), 2) the black is very intense/dark and 3) they will dry out quickly if you leave the cover off, so ink up your image and put the cover right back on.  I do recommend the Stazon cleaner to clean your stamps as this is black ink that likes to stick to your stamps!





For my circles, I used the layering circles dies.  If you number them from largest to smallest, I used 1,4 and 6 for the DSP and 7 for the white.  Place the DSP circles into the embossing folder to catch the portions of the design you want for each circle.  Emboss using the Stamping' Cut & Emboss machine.  Cut out the white circle from the piece where you stamped your dragonfly.

Now you are ready to change the embossed texture into something even more stunning!  Use your sanding block to gently rub across the embossed design.  Take your time and sand away the top most layer of ink from your paper on the raised portions.  This will reveal the white core of the paper.  If you try to do this with our colored cardstock, it will not give the same effect because our paper is a solid color throughout.  (You can see that when you tear the paper - no white core.)




Stamp your sentiment onto the white circle and place all four circles on your card front until you like the placement.  Adhere the DSP circles to the card front and pop up the sentiment circle with dimensionals.  Punch out the dragonfly (you may have to trim off the bottom so it fits into the punch like I had to do in the video).  







I like to add shimmer to my dragonflies, so I use my spritzer filled with a pea sized drop of shimmer paint and 70% rubbing alcohol (don't forget to leave room to shake it!).  Do not use 91% alcohol as it will clog the sprayer - I learned this the hard way.  The spritzer will give a fine coating of shimmer - just spray on a large piece of scrap paper (or use a box like I've shown in previous posts).  Add the dragonfly with dimensionals and you are done!












I had fun playing with different papers and different embossing folders as you can see in my other examples.  I think the green ombre paper embossed with the Little Details folder yields the most dramatic results, but my favorite is the turtle card using the Seabed folder.  This technique is a wonderful way to expand your utilization of your embossing folders and have people wondering just how you got such an interesting look!






One last thing - I have an ordering special this month - purchase $100 or more from my on-line store and you will receive a free pack of DSP called Butterfly Bijou.  It is gorgeous and coordinates with an early release from our upcoming annual catalog.  Use the host code below when ordering - you won't be disappointed.









Karen


ThePowerOfACard@gmail.com

Etsy Shop: The Power of a Card

https://karensliwinski.stampinup.net 

Images Copyright Stampin’ Up!®


Join my Facebook Group (The Power of a Cardmaker):  https://www.facebook.com/groups/1042676296088278/?ref=share


My current host code is: G99ES72V  Please use this for orders less than $150 

and you’ll get a special treat from me.  For order over $150, you will

qualify for host rewards from Stampin’ Up! (plus a treat from me!).



Product List

Christmas Cards in Unexpected Colorways

I love Christmas.  I love making Christmas cards.  I love decorating for Christmas.  And I loved making this video for you!  (Please note, ...